OEM Parts. Best Prices. Guaranteed Fit.
Bulk Order
Contact Us Here

Categories

Browse Categories

Engine Appearance Cover for 2011 Cadillac CTS

Engine Appearance Cover for 2011 Cadillac CTS #0
12
No.
Part # / Description / Price
Price
2
Rubber Grommet with 32 mm Diameter, Round Top, and Tapered Bottom
GM GM
Notes: PARTS: Part included with engine cover.
Description: GM Genuine Parts Rubber Grommet with 32 mm Diameter, Round Top, and Tapered Bottom (Part Number: 12591715) is an OE mounting grommet used for engine cover attachment and component vibration isolation. It provides secure mounting and helps reduce noise and ...
MSRP $7.12
$6.07
MSRP $7.12
$6.07
3
Multi-Purpose Nut
GM GM
Description: GM Multi-Purpose Nut (Part Number: 10042521) is a GM OEM push-on nut used in various underhood locations for fastener retention. Function: Push-on retainer nut used to secure covers and trim where specified by factory assembly.Also known as: Engine Cover R ...
MSRP $10.10
$8.04
MSRP $10.10
$8.04
3
Multi-Purpose Nut
GM GM
Positions: Front
Description: This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
$24.69
$24.69
4
Multi-Purpose Insulator
GM GM
Positions: Front
Description: GM Genuine Parts Multi-Purpose Insulator (Part Number: 24507878) is a factory insulator engineered to fit various engine bay applications to reduce heat transfer and dampen noise. Function: Insulates and cushions components in the engine compartment to red ...
MSRP $11.36
$7.94
MSRP $11.36
$7.94
4
Fuel Pipe Shield
GM GM
Positions: Rear
Description: 3.6L, 2013-2015, outer. 2014-15, outer. Sedan, 3.0L, fuel pipe. Wagon, 3.0, 3.6L, fuel pipe, all. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
4
Intake Manifold Insulator
GM GM
Positions: Rear
Description: 3.0L. Wagon, 3.0, 3.6L, all. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
$47.78
$47.78
5
Rubber Grommet with 60 mm Diameter, Round Top, and Bottom
GM GM
Notes: PARTS: Part included with engine cover.
Description: GM Genuine Parts Rubber Grommet with 60 mm Diameter, Round Top, and Bottom (Part Number: 12591714) is an OEM engine valve cover grommet designed to provide sealing and vibration isolation. Type: Engine valve cover grommet (upper intake manifold sight shiel ...
MSRP $6.78
$5.78
MSRP $6.78
$5.78
8
Engine Intake Manifold Sight Shield Bracket
GM GM
Description: GM Genuine Parts Engine Intake Manifold Sight Shield Bracket (Part Number: 12616618) is an OEM bracket that supports the intake-manifold sight shield to maintain correct positioning and protection of engine components. Purpose: Secures sight shield and hel ...
$38.99
$38.99
11
Push-Pin
GM GM
Description: GM Push-Pin (Part Number: 11589290) is an OEM-style push fastener intended for trim and panel retention applications. Use: Secures interior or under-hood trim, panels or components that use a push-fit retainer.Fit: Designed to fit specified hole sizes and ...
$18.71
$18.71
13
Engine Intake Manifold Cover
GM GM
Description: 3.0L. Engine cover. Wagon, 3.0, 3.6L. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors